99.7% Vegetable Ester Base

KwikKut® OMSecolube

India's only food-grade MQL lubricant. Ester-based, biodegradable, non-toxic — engineered exclusively for the Ogale ecosol range and warrantied with every system.

Biodegradable Non-toxic Non-hazardous Food Grade Vegetable Oil Ester C Net Zero

KwikKut OMSecolube vegetable based ester oil MQL lubricant

The lubricant

Not just cutting oil. A system lubricant.

KwikKut® OMSecolube is blended specifically for the Ogale ecosol aerosol generator. It's formulated to atomise consistently at the micro-quantities MQL demands — no other oil does this reliably enough for us to warrant it. Using any other lubricant in an ecosol system voids the warranty and risks permanent damage to the aerosol generator.

The base is 99.9–99.7% food-grade vegetable oil ester. The additive package contains friction and wear reducing agents — ZnS, MoS2, HBn — in combination totalling no more than 0.3% w/w. The result is an oil that performs at the cutting edge, leaves no toxic residue, produces dry recyclable chips, and is safe for workers to handle without specialist PPE.

Three grades

Choose the grade for your application.

All three grades share the same vegetable ester base and HMIS 0 health rating. The difference is additive package concentration and oxidation resistance.

99-9

OMSecolube 99-9

Entry-grade formulation. Vegetable ester base with standard friction and wear reducing agents. Suitable for lighter machining loads on standard steels and aluminium.

Milling and drilling — standard steels
Aluminium machining
Bar saw cutting
General turning

99-8

OMSecolube 99-8

Mid-grade formulation with enhanced additive package. Better wear resistance for heavier cutting loads and two-shift operations.

Heavy milling and drilling
Tapping and broaching
Two-shift production
Steel and other non-ferrous metals

99-7

OMSecolube 99-7

Top-grade formulation with vegetable ester base, enhanced wear agents, and synthetic antioxidants. Designed for high-speed machining and exotic alloys.

High-speed machining
Exotic alloys (titanium, Inconel)
Deep-hole drilling
Through-spindle applications

Technical data

Full product specification.

All grades share these base specifications. Additive concentrations vary by grade.

Composition

Base oil

99.9%–99.7% food-grade vegetable oil esterFlower and plant based oil esters and extracts

Additive package

Friction and wear reducing agents — ZnS / MoS2 / HBn in combinationTotalling no more than 0.3% w/w

All Grades

Synthetic antioxidants for high-temperature stability

Total vegetable content

> 99.7% by volume (all grades)

Safety classification

HMIS Health rating

0 — minimal hazard

HMIS Flammability rating

0 — will not burn

HMIS Physical hazard

0 — stable

HMIS PPE rating

1 — safety glasses

Carcinogen status

Not listed as carcinogen

Stability

Stable under normal conditions

Handling & storage

Shelf life

8 months from date of packing

Storage conditions

Cool, dry, well-ventilated place — protect from sunlight

Disposal

Biodegradable — dispose per local industrial regulationsDo not release into drains, sewers, or waterways

Dilution

Do not dilute with any other solvent — use neat

Packaging

Pack sizes

35 Litres

Consumption (typical)

2-2.5 litres per day on an 18 hour production cycleDepends on machine model and process

Topup frequency

As required by machine model, tool, and cycle frequency

Blended by

Ogale Machines and Systems, Pune, Maharashtra

Safety rating

HMIS classification.

Health

Fire

Reactivity

PPE

What these ratings mean for your shop floor

Health 0 — minimal hazard. Workers do not need specialist respirators, chemical-resistant suits, or health monitoring. Standard safety glasses (PPE rating 1) are sufficient.

Flammability 0 — the oil will not ignite under normal machining conditions. No special fire suppression requirements.

Reactivity 0 — chemically stable. Does not react with other common shop floor substances, does not require special storage segregation.

PPE 1 — safety glasses required. Standard safety glasses or goggles are sufficient for normal handling and MQL operation. No respirator, chemical suit, or specialist PPE required.

Compare this to water-based coolants, which require biocide management, pH monitoring, periodic aeration cycles, and controlled disposal — none of which apply to OMSecolube.

Safety & handling

Simple to handle. Safer than coolant.

KwikKut® OMSecolube was designed from the ground up to be the safest MQL lubricant a machine shop can use.

Accidental release

Prevent from reaching drains, sewers, or waterways. Not listed as a carcinogen. Follow local laws for disposal. Stable under normal conditions — no special emergency procedures required.

Worker health

Non-toxic, non-hazardous. Safety glasses recommended as minimum PPE. No inhalation risk under normal MQL aerosol concentrations. Fume extractor recommended as good practice.

Chip disposal

Chips machined with OMSecolube are dry and corrosion-free. No coolant carryover. Chips can be directly recycled without washing — saving water and reducing disposal cost.

System compatibility

Recommended for use in Ogale ecosol MQL systems only. Refer other MQL system or machine tool compatibility with Ogale before use. Rotary feedthrough couplings must be compatible with vegetable ester-based lubricants.

Works with